Lawn Tube with Brass Anchor for Pool Safety Covers

Lawn Tubes with Brass Anchors for Pool Safety Covers are 18 inches long and are used when there is no concrete to anchor into. The lawn tubes provide a solid base for safety cover straps to attach to and are ideal for decks with brick pavers, lawns, flower beds, etc. Lawn tubes are intended to be driven into the ground to provide a firm base for the straps of a safety cover to attach to. These lawn tubes can also be used for pavers.

When a pool has flowerbeds, brick on sand, or loose ground around it, that is extensive enough to prevent the installation of certain anchors, anchor tubes provide a superior installation solution. Their wide stance gives them the strength they need to keep the safety cover in place. Simply follow your normal installation procedures hammering, or drilling 7/8" holes. If you are going into brick pavers, the anchor tubes should go all the way into the loose ground. Insert your brass anchors into the tops of the anchor tubes and attach your springs and straps to them as you normally would. In situations where the ground is abnormally loose, such as new construction, you may wish to hammer a length of rebar through your anchor tube for extra holding power.