Natural Chemistry Extra Strength StainFree 1.75 lbs

More Information
Delivery Time 2-5 Business Days
Manufacturer Natural Chemistry
Technical Specs

Directions for use:

Stainfree Extra Strength

1.  Balance pool water
2.  Lower chlorine to at least 1ppm
3.  Add 1lb per 10,000 gallons (38,000L) around the perimeter of the pool with the pump running
4.  One hour later, add METALfree at a rate of 33.9oz (1L) per 20,000 gallons (75,000L)
5.  Add a pulp based filter aid to your cartridge or sand filter. If you have a DE filter, make sure it is
      charged properly with DE
6.  Vacuum pool slowly and thoroughly
7.  After 24 hours, clean out filter:
     Sand Filter: backwash for at least 3 minutes and then rinse for 2 minutes
     Cartridge Filter: clean filter and tank thoroughly
     DE Filter: backwash and recharge with DE
8.  Test and re-balance water. DO NOT SHOCK for at least 1 week (Note: if chlorine level is low, add
     small amounts of chlorine. Do not exceed 2ppm)
9.  Use METALfree weekly to guarantee a stain-free pool
SKU NC07395EACH / NAT-50-972
Manufacturer Part # 07395
Product Features
  • All natural extra strength stain eliminator
  • Blend of industrial strength ascorbic acid
  • Tough on old set-in stains
  • Quickly removes metal staining
  • Compatible with all sanitizing systems
  • Non-toxic and environmentally friendly
  • Phosphate free
  • 1.75 lbs
In stock
Wish List Compare