1. Clean or backwash filter. 2. Calculate the amount of product required using the dosage guide. 3. Pour SeaKlear Phosphate Remover in the pool, distributing it over as wide an area as possible. 4. Then treat with SeaKlear Natural Clarifier at a rate of 2 oz. per 5,000 gallons. 5. Run your filter system continuously for at least 24 hours. 6. If filter pressure increases 10 psi. over normal, clean or backwash the filter. 7. After 48 hours test the phosphate level with a phosphate test kit approved for swimming pool use. 8. If it is needed, reapply SeaKlear Phosphate Remover.
Note: It is normal for SeaKlear Phosphate Remover to cause pool cloudiness.
Dosage: 1 oz. per 10,000 gallons per week to maintain phosphate levels below 125 ppb.
SK1040105EACH / VAN-50-925
Manufacturer Part #
Removes phosphates from pool water
Phosphates come from fertilizer, rainwater, soap & decaying plants
Helps keep pool chemistry balanced
Removing phosphates helps equipment run more efficiently
Will not harm plants or animals
Use with SeaKlear Natural Clarifier for best results