Technical Specs |
Start-Up: Add 1/2 oz. of this product per 500 gallons prior to entering spa. Wait 5 minutes then check chlorine residual. Residual chlorine must read between 2 and 3 ppm. If it does not, additional dosages of material should be added until it does. Once the chlorine residual is established in the 2 to 3 ppm range, the spa or hot tub may be entered.
Maintain: This product should be added daily or as necessary to maintain 2 to 3 ppm residual chlorine. Frequent checks should be made of residual chlorine using a reliable test kit. This product should be broadcast over the surface of the water and allowed at least 5 minutes mix time before testing.
Super-chlorination: Super-chlorinate every 2 to 4 weeks. To super-chlorinate, add 1 oz. of this product for each 500 gallons. Thoroughly clean spa, vacuum and cycle through filter. Resume program when chlorine residual reads 2 to 3 ppm.
Tips: Shocking the spa after each use will destroy organic bather waste. |