Pentair Automation and Controls

The Pentair 521247 Compool to EasyTouch Upgrate Kit upgrades Compool Systems: CP1000, CP2000, CP100, LX100EZT, LX100EZTL, 520348, 520349 and TimeMaster with LX-10 power center.

Upgrade your Compool system and make your old pool technology new again. Now that you’ve experienced the push-button ease of a Compool control system, you’re ready for the next generation in pool and spa convenience with an all-new, one-step upgrade to today’s EasyTouch automated controls.

The EasyTouch® upgrade makes it even more carefree to run your pool, spa or combination with shared equipment. With up to 8 accessory functions, you can put enhanced features like landscape lighting, waterfalls and fountains on a schedule, saving you hassles and precious dollars.

You can control all functions with easy, one-button access from the EasyTouch Load Center. For even greater convenience, add a wired or wireless remote. EasyTouch lets you program your equipment for optimum efficiency. As your pool and spa usage changes or you add or change equipment, just reprogram to maintain efficiency.

EasyTouch system’s onboard diagnostics make it easier than ever. Built-in self-test capabilities make sure your entire pool system is working at peak performance. If a failure should ever occur, a diagnostic screen will report it promptly for troubleshooting and repair.

• 10 button spa-side remote with Temp control & LED
• Sleek design provides easy, fingertip control
• Installs in spa deck or tile, semi-flush or surface mounted.
• Can be retrofitted on previous iS10 installations
• Compatible with EasyTouch and IntelliTouch
• Controls any 10 items: jets, lights, air blower, fiber optics lighting, color lighting, water features, etc.
• Thermostatic temperature control.
• LED indicators for all button with backlit labels.
• Controls VS or VF pump speeds
• Color: White

The EasyTouch® Control Systems family allows full control of all pool and spa features, offering a new level of convenience for pool owners looking for an affordable, convenient pool and spa control system. The system includes an easy to use control panel that is built-in to the outdoor enclosure. This panel allows for full system setup, programming, and everyday operation. In addition, EasyTouch owners can access their equipment via optional indoor control panels, spa-side remotes, and wireless hand-held remotes.

• Pentair part number 520442
• i-Link Home Automation Adapter Interface
• Enables you to control IntelliTouch features via your Home Automation System
• View the pool and spa equipment status
• Turn on or off any device connected to the IntelliTouch system
• View water and air temperatures
• View or change pool and spa thermostat settings
• Compatible with AMX, Crestron, Lutron, Vantage, Elan Systems and others**


**For a complete list of compatible home automation systems please call Pentair at 800-831-7133.

• Pentair part number RCS1
• Additional Spa Jets Switch
• For multiple jet pumps
• Wall Mount
• Single Plate
• Works with IntelliTouch, EasyTouch and Compool LX80 Control Systems
• Factory original Pentair replacement part

• Pentair part number 520406
• Works with white (incandescent) lights only
• Use in any relay socket on the Power Center or Load Center
• 8 Level Dimming (30 Percent to 100 Percent)
• Supports multiple lights up to 1,000 watts max per module
• Use up to 10 Dimmers with a max of 4,000 watts per Load Center
• Only works with 120 VAC power
• Factory original Pentair replacement part

The Pentair IntelliTouch 520138 Indoor Control Panel has a 3-3/4 inch back-lit monochrome LCD and is hard wired to the Load Center or the Power Center. The Indoor Control Panel features all of the controls necessary to easily configure and operate the IntelliTouch pool automation system. Indoor Control Panels are wall mounted and can work in combination with up to 4 Indoor Control Panels, a Mobile Touch Wireless controller and PDAs and Tablet Controllers.

The Pentair 521222 IntelliTouch i10+3D Personality Kit is designed for a pool and spa application where the two bodies of water have a separate equipment sets (2 Pumps, 2 Filters and 2 Heaters). The Personality Kit is the hardware that controls the IntelliTouch System's functions and operational options. The i10+3D Kit controls the separate pool filter/pumps plus 8 auxiliary items (lights, blowers and additional pumps) and allows for the convenience of motorized valves for water flow separation between your pool and spa.

Purchasing a Personality Kit is the second of the three step order process for an IntelliTouch automation system. Step 1 is selecting an IntelliTouch Load Center or Power Center which is available with or without an IntelliChlor Salt Chlorinator Transformer. The 3rd step is selecting an Interface Device or Remote. These are available as wireless remotes, indoor hard-wired controls and even computer or phone operated Screen Logic devices.

The Pentair 521221 IntelliTouch i9+3 Personality Kit is designed for a pool and spa application where the two bodies of water have a shared equipment set (Pump, Filter and Heater shared by Pool and Spa). The Personality Kit is the hardware that controls the IntelliTouch System's functions and operational options. The i9+3 Kit controls the pool filter/pump plus 8 auxiliary items (lights, blowers and additional pumps) and allows for the convenience of motorized valves for water flow separation between your pool and spa.

Purchasing a Personality Kit is the second of the three step order process for an IntelliTouch automation system. Step 1 is selecting an IntelliTouch Load Center or Power Center which is available with or without an IntelliChlor Salt Chlorinator Transformer. The 3rd step is selecting an Interface Device or Remote. These are available as wireless remotes, indoor hard-wired controls and even computer or phone operated Screen Logic devices.