Max-E-Glas/Dura-Glas Pump Parts
Stop looking for Max-E-Glas/Dura-Glas Pump Parts ... you're already here! With 27 Max-E-Glas/Dura-Glas Pump Parts in stock from $4.99 to $99.99, you'll find the one you need here. YourPoolHQ has the best selection of pool products and spa products anywhere, at prices that won't overflow your budget. All your favorite brands, for every aspect of maintenance and supply, ready to ship directly to you. Every one of our Max-E-Glas/Dura-Glas Pump Parts comes with our 100% satisfaction guarantee, so you can be confident you're getting what you need. So shop our comprehensive assortment of Max-E-Glas/Dura-Glas Pump Parts and use our simple online checkout when you're ready. If you don't see or don't know what you're looking for, give us a call or send us an email - we'll help you find it.
-
- Item#:
- STA-101-3735
- Our Price:
- $4.99
List Price: $7.99 - Description:
- Sta-Rite part number U30-74SS
- Hex Head Screw
- 3/8-16 x 1 inch
- Stainless Steel
- Factory original Sta-Rite replacement part
Used on the following Sta-Rite products:- Dyna-Jet - TPE & TPR Pumps
- Max-e-Glas II Pumps
- Dura-Glas II Pumps
- Pantera Sand Filters
- Pantera Skid Systems
- Max-e-Pro Pumps
- Dyna-Wave Pumps
- Dyna-Pro Pumps
- Dyna-Pro E Pumps
- Max-e-Glas Pumps
- Dura-Glas Pumps
- Dyna-Glas Pumps
- Dyna-Max Pumps
- Swimquip 14962-0105 Valves
-
- Item#:
- STA-101-1465
- Our Price:
- $15.99
List Price: $21.99 - Description:
- Part number 17304-0100S
- Sta-Rite Pump Shaft Seal
- Replace shaft seal each time the motor is replaced
- Cross References: 200, SPG200, PS200, 92500150, 354545
- Fits Sta-Rite Dura-Glas, Max-E-Glas & SuperMax Pumps
- For pumps made after 1998 (without copper insert)
- Factory original Sta-Rite replacement part
-
- Item#:
- STA-101-3726
- Our Price:
- $14.99
List Price: $19.99 - Description:
- Sta-Rite J3-2 Copper Seal Plate Insert
-
- Item#:
- SPG-601-1083
- Our Price:
- $8.99
List Price: $12.99 - Description:
- Sta-Rite part number C20-123
- Pot to Volute Gasket
- Fits several Sta-Rite pumps (see below)
Fits the following Sta-Rite pumps:- Sta-Rite JW Series - Above Ground Pump
- Sta-Rite JWP Series Pump
- Sta-Rite JWPA Series
- Sta-Rite Max-e-Glas & Dura-Glas Series
-
- Item#:
- STA-101-6233
- Our Price:
- $59.99
List Price: $74.99 - Description:
- Sta-Rite part number C105-137PEBA
- Replacement Pump Impeller
- Fits 1 HP Full Rated & 1.5 HP Up Rated pumps
- Fits Max-E-Glas & Dura-Glas pumps
- Factory original Sta-Rite replacement part
-
- Item#:
- STA-601-5141
- Our Price:
- $19.99
List Price: $24.99 - Description:
- Part number U109-93SS
- Fits old style Dura-Glas and Max-E-Glas pumps made before 1998
- Fits Anthony pumps
- Change pump seal every time the motor is changed
- Factory original Sta-Rite replacement part
-
- Item#:
- STA-101-7167
- Our Price:
- $58.99
List Price: $73.99 - Description:
- Sta-Rite part number C105-137PDA
- Pump Impeller
- For 2 HP Full Rated Pumps
- 2-1/2 HP Up Rated Pumps
- Fits Sta-Rite Dura-Glas and Max-E-Glas pumps
- Factory original Sta-Rite replacement part
-
- Item#:
- STA-101-5155
- Our Price:
- $65.99
List Price: $75.99 - Description:
- Band clamp for pump housing
- Clamp only
- Knob sold separately
- Knob number is WC36-22
- Factory original Sta-Rite replacement part
Used on the following Sta-Rite pool pump models:
- IntelliPro Variable Speed
- Dura-Glas II
- Dura-Glas
- Max-E-Glas II
- Max-E-Glas
- Max-E-Pro
-
- Item#:
- STA-101-3746
- Our Price:
- $12.99
List Price: $19.99 - Description:
If the O-ring is swollen or cracked it can cause your pump to suck air and spit air back into the pool through inlets and it must be replaced. Not replacing O-rings can damage your pool equipment, have a negative effect on filtration and decrease the efficiency of pool chemicals.
- Replaces Sta-Rite part number U9-229
- Pump Lid O-Ring
- Fits Sta-Rite Dura-Glas and Max-E-Glas
- For pumps with 5" diameter trap
- Replace O-rings when cracked or swollen
- Factory original Sta-Rite replacement part
-
- Item#:
- SPG-601-1133 - 2
- Our Price:
- $9.99
List Price: $14.99 - Description:
If the O-ring is swollen or cracked it can cause your pump to suck air and spit air back into the pool through inlets and it must be replaced. Not replacing O-rings can damage your pool equipment, have a negative effect on filtration and decrease the efficiency of pool chemicals.
- Sta-Rite part number U9-228A
- Seal Plate O-Ring / Gasket
- Fits Max-E-Pro, Max-E-Glas, Dura-Glas, Max-E-Glas II, Dura-Glas II, IntelliPro
- Also fits Aqua-Flo Dominator Pumps (replaces Aqua-Flo part number 92200180)
- Also fits Hayward Star Clear Plus C751, C900, C1200 and C175 Filters (replaces CX900F)
- Outside diameter: 10-1/2 inches
- Inside diameter: 10 inches
- Thickness: 1/4 inch
-
- Item#:
- STA-101-3743
- Our Price:
- $4.99
List Price: $7.99 - Description:
- Sta-Rite part number U9-226
- Diffuser O-Ring
- Fits Sta-Rite Max-E-Glas and Dura-Glas pumps
- Factory original Sta-Rite replacement part
-
- Item#:
- STA-101-3723
- Our Price:
- $36.99
List Price: $48.99 - Description:
- Sta-Rite part number C3-193P1
- Fits Sta-Rite Dura-Glas, Max-E-Glas & JWPA series pumps
- C3-139P is molded into the top of the cover
- Sta-Rite factory original replacement part
