AO Smith MGT-60-5098
- Our Price:
- $168.99 Save: $61.00 (27%)
List Price: $229.99
The AO Smith B127 Pool Pump Motor is a C-Face Mount style motor with a 56J Frame and is a Full Rated 115/230 Volt motor. C-Frame motors have a round "face" where the motor mounts to the pump with 4 bolt holes to attach the pump and a threaded shaft.
C-Face 56J Frame Motors are most commonly used on Hayward Super II, Hayward Super Pump, Hayward Northstar, Hayward Max-Flo, Hayward 5060 Booster Pumps, Jacuzzi Magnum, Jandy Plus HP, Jandy Stealth and Jandy HHP pumps.
It is important to know that pool pump motors are not manufactured by the pump manufacturer; the motor will usually be manufactured by AO Smith, Magnetek or Centurion. Your pump's motor should have a label or faceplate on it which includes the information you need to replace your pump motor. The most important categories to note will be the horsepower (hp), motor frame (fr), voltage and service factor (sf). Some labels will provide you with a model number and it will usually be listed as CR or CAT.
- 3/4 Horsepower
- Full Rated
- Service Factor: 1.50
- 56J Frame
- Threaded Shaft
- 115/230 Volt
- 12.0/6.0 amps
- Capacitor Start
- Automatic Overload Protection
- Non-Reversible CCW
- Stainless Steel Shaft
- Can replace Hayward AX5060M Booster Pump Motor
Cross Reference: SPX1607Z1BE, 1607Z-1-B4C, 1607Z-1-BC, SP-1607-Z1-B4C, SP-1607-Z1-BC, A0564200, C48K2N117A3, ST1072, 141968, 150235, 152559, 152565, 152617, 152769, 158131, 158534, 158575, 158595, 159811, 159982, 164276, 164302, 164520, 164564, 164582, 164808, 165111, 165384, 168097, 173763, 177018, 177024, 177072, 177169, 177459, 177499, 177842, 193631, B626, C1099, EB127, 1104355400, 15443, CT107, 7-164302-24, 10-177018-24, 10-164302-22, 8-177499-20, 8-164276-20, 8-164302-20, 8-164520-20, 8-168097-20, 8-173763-20, 8-164302-24, 7-193631-24, 8-164302-22, 8-168097-21, 8-173763-21, 5KC33MN2514X, 35B1187, MGT605098, 816430224, 16430200
When replacing your pool pump motor you should always replace the shaft seal as well. The shaft seal is a 2 part piece made of rubber, metal and ceramic and keeps water from entering the pump motor. It is located near the impeller at the end of the motor shaft. Shaft seals vary between pumps so be sure to order the appropriate shaft seal for your pump.
100% Satisfaction Guarantee
We expect our customers to be 100% satisfied with the products we sell and the service we provide. If at any time in the next 30 days you are NOT 100% satisfied with your purchase, you may send your purchase back for a refund or store credit for the price paid for the merchandise (minus what you paid for shipping), or you may exchange it for another item in our store.